Industrial Position Sample Resume 2
1234 Elm Street, Anytown, ST 00000 • (123) 456-7890 • email@example.com
A challenging Materials Development / Research Management position with a high-growth engineering company specializing in manufacturing and testing of semiconductors, superconductors, vacuum and surface science instrumentation, and other high tech materials.
- Well-qualified and technically-proficient Research Scientist with more than sixteen years laboratory experience and excellent academic qualifications.
- Chosen as reviewer for applicants for 2007 AAAS Science and Technology Policy Fellowship. Selected to participate in panel on Congressional Fellowships for 2007-2008 class.
- Referee for peer-reviewed mathematics journals. Reviewer for AMS MathSciNet, the mathematical abstracting service. Selected as reader (grader) for AP Calculus exams by the Educational Testing Service (ETS).
- Substantial experience in sophisticated research techniques and technologies: surface analysis, stress analysis, material testing, failure analysis, mechanical testing, surface technology, deposition systems, semiconductors, thin films, vacuum and surface science instrumentation.
Education & Training
Ph.D., Condensed Matter Physics, Name of University, City, ST 1984
M.Sc., Physics (Physical Methods of Analysis), Name of University, City, ST 1979
B.Sc., Physics (with Electronics), Name of University, City, ST 1978
Instrumentation Engineer Trainee, APX Scientific Instruments, City, ST 2002
Doctoral Research Fellow, Dept. of Electrical Engineering, Name of University, City, ST 1985
Visiting Scientist (Trainee Beam Line Scientist) 01/02 - 06/02
Lap Corp, CUNY - 03/03 - 07/03
- Within first week was able to résumé 75% of the beam line scientist duties and managed night shift without assistance from the beam line scientist.
- Organized and conducted international inter-comparison of primary standards for low pressure.
- Worked as co-investigator on high technology materials, such as a project with microchip maker, Applied Materials Corporation, on properties of ultra thin films of SiO2Nx/si wafers and was involved in research in nano-structures and electronic properties of thin films of great technological importance.
- Supervised Post Doc. during lab development and helped design DC Magnetron Sputtering System and Thin film deposition and thickness monitoring system and helped setup Electron Spectrum Analyzer, which was damaged during transit from [name of] research lab to LBL.
- Designed and installed a computer controlled auto calibration system which significantly saved time and automatically recalibrated the beam of energy to eliminate angular errors.
- Managed Surface Science Laboratory at Physics Department (1989 – 1998) and introduced collaboration between Surface Science lab and local industry R & D labs.
- Managed research projects originated both inside and outside the university and coordinated group research activities and PhD and MS research projects; and promoted research collaboration with local industry and research centers through organizing short courses and workshops.
- Upgraded departmental mechanical/machine shop hardware reducing maintenance cost by one-third and implemented professional training program for mechanical/machine shop personnel which increased productivity and efficiency significantly.
- Managed freshman physics labs and graduate labs (1995 – 2001) and supervised Ph.D., M.Sc. Thesis and Graduate Lab projects.
Research & Development:
- Developed traceable methods for measuring outgassing of water from technical materials and
- Redesigned VG electron beam heating power supply and installed purpose built power booster to allow more controlled heating and extended the temperature range from 1000 °C to 1600 °C to facilitate flashing sample.
- Designed and built a trip monitoring and emergency power fail system to prevent UHV chambers from being contaminated with oil from turbo backing pumps and keeping vacuum in until system can be restarted safely when power returned and maintained the correct temperature of the X-ray gun and water chillers.
- Taught, developed and coordinated freshman and senior-level undergraduate courses for 15 years. Innovative methods and course material impressed [Name of] University so much that they adopted course material for use in physics courses; also taught graduate special topic courses related to Surface Physics and Materials Science.
- Designed and taught courses to address transitions in mathematical understanding at a variety of levels. Developed and taught Gettysburg’s first mathematics service-learning course (for pre-service teachers). Coordinated a successful biweekly colloquium series to enhance public understanding of mathematics through novel speakers and interdisciplinary topics. Participated as a mathematics speaker for general and technical audiences and mentored students in summer research.
- Designed demonstrations for Large Lecture Theater teaching that were later adopted for use by department.
Web authoring: Microsoft Front Page 2000, Netobject Fusion, Macromedia Flash and Adobe Page Mill, Physics Department Webmaster 1999-2001
Networking: Client-server Networking on MS Windows NT/2000; Peer networking using MS Windows 95/98, OS2 warp, Mac OS. Ethernet and Token ring networking using TCP/IP, AppleShare and AppleTalk.
Operating systems: MS Windows NT Workstation and Server, Windows XP, Windows 2000 Professional, Server and Advanced Server, MS Windows 9x, OS2 WARP, Macintosh all operating systems including OS X
Business software: MS Office 2000 MS Office XP, MS Office X
Publications and Conferences:
- M.A. Jones, L. Williams, A. E. D. Smith and A. E. Doe, "Name of Article", Name of Journal, Oxford (1985).
- M.A.Jones, A.E.D. Smith, A.E. Doe, "Name of Article", Name of Journal, V 19-23 Sept. 1988.
- Z. Smith, M. S. Wilson, O.B. Dabrei and M.A. Jones, "Name of article", Name of Journal, 12-14 March 1988, JFYHM, Acme.
- M.A. Jones, S.M.A Duran and E.E. Kirk, "Name of article", Name of Journal, New York, 13-16 April 1992. Proceedings Published by University of New York, p187.
- A.E. Doe, M.A. Jones and A.E.D. Smith, "Name of Article", IEEE Transactions on Dielectrics and Electrical Insulation, 4, 1, (February 1999).
- N. Smith, A. L. Moore, and M. Jones, "Name of Article", in "Recent Developments in Material Processing and Modeling", Ed. by XYZ Press, (1999) 346-369.
- N. Smith and M. A. Jones, "Name of Article", ICSOS-6, Vancouver, Canada, August 19-30, 1998.